My rear brake hubs look rusty. Has anyone painted their's? Should rustoleum do the trick, or heat paint for this application? I'm going to remove the hubs and epoxy primer them I think, then paint.... Any suggestions??
My rear brake hubs look rusty. Has anyone painted their's? Should rustoleum do the trick, or heat paint for this application? I'm going to remove the hubs and epoxy primer them I think, then paint.... Any suggestions??
if you are going to paint the drums, i would reccomend a high temp paint. engine enamel is what most people use. i'm not sure about this, but i have heard people put the drum (or caliper if you have discs) in the grill/oven to cure the paint quickly, someone double check this for me.
There is an actual brake component paint you can use. Pep Boys, Autozone, etc. all carry it. I would get a drill with a heavy-gauge wire wheel and clean the drums off first before you paint them. I think the heat from braking actually cures the paint.
A forum community dedicated to the Ford Taurus and SHO models, Mercury Sable and Lincoln MKS. Join the discussions on EcoBoost, aftermarket performance, and more!
