OK, so the p-side front window gets real slow going up - it would come out of its back rail then go back in and finish going up. I took a look and found nothing wrong. A mechanic told me that the regulator was binding so I installed a new regulator. Same problem. So, in screwing around, I noticed that if I remove the one bolt on the bottom holding the front rail in, problem goes away. So, I need to replace my front rail, I think. I really don't know why this would be happenning but the only thing I can see is going to the boneyard and getting a front rail off a junk car. Anyone know how to get the rail out?