Taurus Car Club of America : Ford Taurus Forum banner
1 - 2 of 2 Posts

· Registered
79 Posts
Discussion Starter · #1 ·
Hello again to everybody

Inspired on the "Do it Yourself" and in the Nice Pics about the "Nice" Rust Damages
in the thread:


So I Feel the need to share my Experiences and ask for your support...

Years Ago... My water pump "pipe" or tube attached between the pump and the lower rad Hose,
will "crack" at the pump area so was near impossible to "sold" again, and the pump neck
was so imposible to introduce another tube cause the rust, as result:
needed Change of Water Pump and to make myself an "tube", so when read the mentioned thread
remember how was helped by the local "muffler man" for heat and bend a tube i found somewhere.

So send a Picture of that tube "made in garage", well, aply very well for the neede urgence....
so the time is going an the tube is getting more and more rust.

The Intention is to Find a new OEM Tube pipe for my 1988 3.8L

Also the Water "Elbow" in the intake is coming rusted, so needed replace to do.

One of you Know the Part Numbers of the "pipe" and for the "elbow" or some web location
to buy them? :dunno:


1 - 2 of 2 Posts