Taurus Car Club of America : Ford Taurus Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
This week end i have to remove the valve body on my 01, i need to verify if the pump or pump shaft has failed. i need instuctions on how to do it with the trans still in the car. i have posted my trans issue before and with help belive the pump/ pump shaft to be the problem. just need help getting the valveboby out and what to look for when its out. Thanks:)
 

·
Registered
Joined
·
25 Posts
the how i fixed my ax4n tranny article is great. you will need to get the valve body out and then open the pump case and check and see if anything inside it is broken like the two guide rings. you will also want to make sure that the pump shaft is making a solid connection inside the pump and also inside the torque converter as well. you may also want to check for sticking valves and broken retaining clips.
 
1 - 3 of 3 Posts
Top