Taurus Car Club of America : Ford Taurus Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Ok folks, jsut looking for a little bit of advise. I have changed the rear brkaes on my 97 Taurus GL. They are discs. Now, here is the hard part, bolting the calipers back in. It's hard because the line to the emergency brake is RIGHT there. Can't get the bottom bolt in. IT's driving me mad. The bolt hoels don't line up, if you try to screw the thing in it just pops out of place. So, please, if you've done it and have any tips, please let me know ASAP. My car is on jackstands as we speak.

Thanks.

BTW, who designed the 97 Tauruses? I think I am going to pay them a little visit! ARGH!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top