Tranny Swap

WELL, I AM DOING IT, IM PULLING A 5SPD FROMA 3.0L PROBE, ITS A DOHC THO, BUT THEY ALL BOLT UP TO THE SAME TRANSMISSIONS. ITS ONLY 100 BUX
AND ILL NEED THE ECM FOR IT TO MAKE IT RUN. OR JUST GET MY COMP FLASHED SINCE I WILL HAV E A SUSPENDED LICENSE FRO A MONTH. GIVES ME PLENTY OF TIME. BUT SO FAR SO GOOD. IM AM GOING TO DO A TEST BOLT UP AT TEH YARD TOMARROW TO SEE IF IT ALL ACCUALLY WILL WORK. ALL TRIAL AND ERROR. BUT IF IT WORKS, I AM THE 1ST. YALL CAN PROLLY TELL IM GONNA BE STUBBORN BOUT THIS.

how do i contact alberto? and how much i have a month to get my projekt done. so far i have been doing a lot of resaerch on it all, and its going to work out so far, just rewire a couple switches and a few other things that may pop up.

well, i got it out and all, fitted it to a motor at teh junkyard, doesnt fit. there are 2 diff types of fwd manuals i have seen. hydrolic and cable clutches. the hydrolic one will not fit at all. the other is the cable one, that one looks like it might, since it is comiong from sho motor, and a sho motor uses tha ax4n(s)(whichever) anda 3lter can use the same, means tehy all have the same bell housing. so in theory it should work. oh and the top to bolts i could see are the same distance from eachother. so lets hope it works.