Taurus Car Club of America : Ford Taurus Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
587 Posts
I would paint them black



Sorry I have not washed my car lately so I got wax from the last buffing and bird turds all over it lol’s so I will wash it soon the wheel you can see the wax that got flung on it by the buffer any ways hope this helps . and ya the paint has no runs etc or sags. i did mask wile it was on the rims i hate rattle cans they do not work the way i like them too in the industry they call duplicolor= popycolor.

http://www.tcpglobal.com/airbrushdepot/ItemDetail.aspx?ItemNo=ONE+199L-QP

http://djvmerchandise.com/pro1410620.html

that sri is one of the best on the market but the one listed below will work just fine
http://www.cpocampbellhausfeld.com/air_tools/spray_guns/dh4200.html
do not forget to wear this wile painting see link below with the paint I suggested
http://www.homedepot.com/h_d1/N-5yc1vZ1xi0/R-100195886/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
of course I can do this type of paining I got a shop at my use. so be careful even with spray can's they say you should wear the mask because of the fine particles in the over spray.
 

·
Premium Member
Joined
·
17,415 Posts
Clean them up to the best of your ability and drive :) They look great as is.
 
1 - 4 of 4 Posts
Top