Starter Misery
Starter on my 93 Taurus 3.0 won't turn
I addressed this problem a couple of days ago but I've discovered some new things since then.
When I turn the ignition there is a click from a small black box by the battery.
I do have 12 volts at the wire going into the selenoid.
When I turn the ignition i get about 5.5 volts at a wire coming out of the selenoid and going into the starter but the darned thing won't crank. Any ideas?
Also, someone musta really cranked on the bottom retaining bolt on the starter because the head is missing. How tough is it to remove the rest of the bolt and what is the best procedure to get it out of the hole?
I addressed this problem a couple of days ago but I've discovered some new things since then.
When I turn the ignition there is a click from a small black box by the battery.
I do have 12 volts at the wire going into the selenoid.
When I turn the ignition i get about 5.5 volts at a wire coming out of the selenoid and going into the starter but the darned thing won't crank. Any ideas?
Also, someone musta really cranked on the bottom retaining bolt on the starter because the head is missing. How tough is it to remove the rest of the bolt and what is the best procedure to get it out of the hole?
1 - 1 of 2 Posts
1 - 1 of 2 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Taurus Car Club of America : Ford Taurus Forum
A forum community dedicated to the Ford Taurus and SHO models, Mercury Sable and Lincoln MKS. Join the discussions on EcoBoost, aftermarket performance, and more!
Full Forum Listing
Recommended Communities
