TBH, you may want to head to your nearest pull a part, and harvest the whole seat track and leave the seat back and butt cushion from there. Then unbolt/rebolt the SHO seats to the frame with the correct stuff there. Once you've done that, splice in the lumbar power to the current power wire. This way, the seat track position sensor is good, the seat belt pretensioners are good, and no flashy airbag crap. Do the same for the passenger side.
Hey did you get those seats from a 1996 silver SHO in "northern" NC?
Like Sheila said, Vash/Sable23 and myself have some pics of how to dissassemble and splice in...should be under good 'ol Topic Finder. Not sure how much you are going to enjoy splicing, esp since you are missing two or three components per seat that contribute to the airbag operation.
Hey did you get those seats from a 1996 silver SHO in "northern" NC?
Like Sheila said, Vash/Sable23 and myself have some pics of how to dissassemble and splice in...should be under good 'ol Topic Finder. Not sure how much you are going to enjoy splicing, esp since you are missing two or three components per seat that contribute to the airbag operation.
