[95FORDT]

I want to put a SHO front and rear piece on my GL. Im preety sure its possible just have to get the SHO head lights. Is there anything else I would have to do to bolt in on to my car? Ive already found the bumper from someone else so I want to hopefully do it soon.

 

[SHO 2NV]

You'll want to get the front fenders too. If you can't find any SHO's, you can use Sable fenders.

Good luck.

 

[95FORDT]

I mean the whole front thing. The bumper. Not just the top grille thing.

 

[qwertz9586]

You will need the hood, fenders, side markers/conering lights, header panel, wiring harness (for the cornering lights), and front bumper grille and cover. Everything except the bumper covers can be taken from a Sable. IIRC, the headlights on the Sable/SHO don't mount in the same location as the Taurus headlights so it needs the header. If you plan on keeping the stock fenders and lights, I'm sure the bumper cover from the SHO can just replace the original grille and bumper cover. There's a topic in General Discussion about that. The SHO rear bumper cover is an exact swap.

 

[95FORDT]

I appreciate it man. Thanks.