Taurus Car Club of America : Ford Taurus Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I've been doing some reading, and was wondering if anyone has tried or knows some great info about this.

I have a 1995 Taurus SHO, 3.2L. I have read about some people swapping the cams in these with the cams from a 3.0L, for a more aggressive lift.

Any suggestions?
 

·
Registered
Joined
·
374 Posts
Easiest way is to just grab a set of 3.0 heads and check the shims for wear. As for more "aggressive lift", the 3.0 cams will definitely be better than what you have, but it has nowhere near the lift that SHONut's +20, +40 or TriFlows.
 
1 - 3 of 3 Posts
Top