Taurus Car Club of America : Ford Taurus Forum banner

Seat Belt Cleaning

2K views 2 replies 2 participants last post by  chartmaker 
#1 ·
Mine quite dirty, especially in two areas. One is the area around the button and the other where you grasp the belt while clicking it. I put household ammonia in a cup, maybe half pint. Pulled the belt all the way out, and chocked it out. Made a loop of the belt near the button area and worked it up back and forth in the ammonia until the liquid got dirty. Refill and continue. Wiped the belt with old towel. Left the belts out with the windows down in sun to dry. However the loop in the cup did not work near the bottom and it did not look dirty. Today noticed. Ammonia is a gas dissolved in water so when it evaporates, nothing is left. Today wiped them down with paste wax for easy in/retract.
Just sharing.
-chart-
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top