Taurus Car Club of America : Ford Taurus Forum banner

Probably Nothing New

1981 Views 12 Replies 8 Participants Last post by  JasonBVHS
http://www.vindustries.com/taurus/scvulcan.html I found this site while i was poking around. D---ed if that engine doesnt look familiar...im sure that a lot of you have seen the site before. With that sort of an arrangement couldnt someone get a piece of thick aluminum stock and work out their own adaptor for mounting the eaton to the lower intake manifold? I know everyone tries unsucessfully to come up with an idea, as read in MANY frustrated post replies on the topic, but what this guy has going does not *seem* that complicated. And eatons are so cheap and plentiful, I saw no less than 5 supercoupes in the junkyard the other day (granted they were probably picked over). Ehh...so its a newbie post...give me time and ill develop the requisite cynicism... <_<
1 - 1 of 13 Posts
There's like 0 hood clearence to put a roots type blower on a Gen 3 or 4 though, right? -Dan
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.