Taurus Car Club of America : Ford Taurus Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
I've got a Gen II and today on my way home my power lock and seats stopped working. Got home, pulled the fuses and replaced the 1 that blew. But now the powerseat keeps sounding like it wants to move every few seconds and i can't move up and down. What's goin on with this?
 
G

·
Possibly dirty contacts in the switches. I would take the switches out, take the cover off and clean them with some contact cleaner.

Nice sig, BTW.
 

· Registered
Joined
·
22 Posts
You may have a bigger problem. If a fuse blew and it wasn't a surge, then obviously something is wrong with the circuit. It may be the electronics in the seat that are doing it, or something along the way. If you have dual power seats you might want to swap out the electronics on the passenger seat and see if it performs any better. My opinion is that the seat electronics are blown. <_<
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top