On The Way To Make My Slo Sho

2245 Views 24 Replies 8 Participants Last post by SHO Continental, May 27, 2004

firstgen89sho

Discussion Starter · May 13, 2004

******Will be updating this Post as I progress along, probably be a couple monthes, look for more and more pictures to be added*******

Well.. was at the pick-a-part today and came home with some gravy.....

http://nelson.macd.ca/sho1.jpg' alt='' width='640' height='480' class='attach' />[/url]
Leather Wrapped Steering Wheel and SHO cover

[url=http://nelson.macd.ca/sho2.jpg][img]http://nelson.macd.ca/sho2.jpg' alt='' width='640' height='480' class='attach' />[/url]
SHO front Bumper w/ foglights (that are broken)

[url=http://nelson.macd.ca/sho3.jpg][img]http://nelson.macd.ca/sho3.jpg' alt='' width='640' height='480' class='attach' />[/url]
Lower exterior door panels

[url=http://nelson.macd.ca/sho4.jpg][img]http://nelson.macd.ca/sho4.jpg' alt='' width='640' height='480' class='attach' />[/url]
Ground effects (they fell of into my hands as the SHO was a rust bucket)

[url=http://nelson.macd.ca/sho5.jpg][img]http://nelson.macd.ca/sho5.jpg' alt='' width='640' height='480' class='attach' />[/url]
Rear SHO bumper

[url=http://nelson.macd.ca/sho6.jpg][img]http://nelson.macd.ca/sho6.jpg' alt='' width='640' height='480' class='attach' />[/url]
SHO underhood blanket

as well picked up the leather shift boot, but the leather shift nob was in no shape to take.... gonna have to see if work can get me one in...

I picked all this up for $100 CDN....

on Saturday, I'm going to be dropping the tranny and subframe out of that car so I can finish off converting my 3.0 vulcan over to a manual....

See less See more

1 - 1 of 25 Posts

kjw86ca

· #20 · May 20, 2004

^^^ Thats for sure! My Duratec was so rev happy, it revved to 6,500, my Vulcan red-lines at like 5,300. It's quite a bit of difference. :blink:

1 - 1 of 25 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.