Taurus Car Club of America : Ford Taurus Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4,022 Posts
Discussion Starter #1
in telling is there a way to install this wrong like 2 screws and nowhere to go lollll but seriously do you have to adjust it and if yes how

how to install it properly and adjust it too

cuz my car is starting too act weird and if im doing like a 100 km and i press my pedal normally the car shift down and do a kickdown and start too accelerated real fast but now as soon as im up 80 there is no way it will not do it no more

snifffff and all the gears are shifthing normally the only thing is for some weird reason it started to act like i had a big shift kit in there and all of the gears where getting pretty hard then poof all to normal

info ?
 

·
Registered
Joined
·
4,022 Posts
Discussion Starter #4
thew vss as been changed and the tp sensor was gived to me for free lolllllll
 

·
Premium Member
Joined
·
2,277 Posts
it should set right on, u may have to turn it sideways a degree or two... the spring should not be wound up when u install it. If you have trouble getting the old one off, i just patiently unscrewed the old screws with a set of vice grips...the screw strip very easily. I took my throttle body off when i did mine.
 
1 - 5 of 5 Posts
Top