Taurus Car Club of America : Ford Taurus Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi,
Newbie to the forum posting wise. Purchased a 2002 SES Taurus with the vulcan engine recently.

I have a service manual coming off of ebay but it hasn't arrived yet. I would like to get at the front brakes today and could use the torque values for the caliper mounting bolts and the pins. While I'm at it I also need the values on remounting the wheels. I would assume around 95 ft/lbs on these?

Thanks much,

Dan :)
 

· Devoted Member
Joined
·
2,407 Posts
Hi,
Newbie to the forum posting wise. Purchased a 2002 SES Taurus with the vulcan engine recently.

I have a service manual coming off of ebay but it hasn't arrived yet. I would like to get at the front brakes today and could use the torque values for the caliper mounting bolts and the pins. While I'm at it I also need the values on remounting the wheels. I would assume around 95 ft/lbs on these?

Thanks much,

Dan :)
I just use German specs...Gutentite
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top