Need a shop in NJ - 95 SHO MTX motor build
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
I need Water pump bolt placement and torque specs.
Taurus and Sable General DiscussionI have a 2002 Ford Taurus 3.0l v6 ohv. I'm replacing my water pump. I made a rookie mistake and forgot to take a picture of which bolts come from where. Can anyone help me out with their placement and the torque specs? I know there are 2 that go through the water jet. Also, one if the smaller...- 10
- 202
-
Jeremy55439 · updated
-
Post a Picture of your Bull in The Bull Stable!
Taurus and Sable General DiscussionAfter going through some old photos I found one of my old 92GL after it got hit when parked and the trans went out. So with that 'blast from the past' and knowing how some people have not posted pics of their Bulls, go ahead and post them up. Past and present ones, just as long as they were...- 922
- 141K
-
sousa632 · updated
-
Ambient temp sensor problem
Taurus and Sable General DiscussionI have a 2008 Taurus limited. The external temp is always at 100+ deg. Is the sensor bad and what does this effect?- 0
- 58
-
Mercury Sable 93-95 dash clock
Taurus and Sable General DiscussionHello, I am looking for Mercury Sable dash clock, working condition, if somebody has to offer, I will be very thankful- 0
- 49
-
2006 taurus unsovable problem.
Taurus and Sable General DiscussionThought this may help other owners, my 2006 Taurus 75k miles become hard to start after shutdown, replaced plugs, fuel filter, fuel sensor and no codes showing, thought I would try one thing before taking to dealer, pulled the ground wire(battery to fender) used file/sandpaper to clean paint...- 1
- 106
Join now to ask and comment!