Taurus Car Club of America : Ford Taurus Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
533 Posts
Discussion Starter #1
I dont have any mags on my car (only damn rims with a cover) and I would like to know if the SHO mag or the taurus mag are 16inches and if I can have a pic (with the model and the gen) it will be appreciate !

thx
 

·
Premium Member
Joined
·
6,077 Posts
SHO slicers are 16 x 7, I believe. The bolt pattern is 5 x 108mm.
 

·
Premium Member
Joined
·
2,620 Posts
Originally posted by TrueBlue@Jun 17 2004, 02:15 PM
SHO slicers are 16 x 7, I believe. The bolt pattern is 5 x 108mm.
Slicers on the GEN1 1991 were non directional and are 16X6. Tire size 215/65-16
Slicers on GEN2 from 1993 on are unidirectional and are 16X6. Tire size 215/65-16
GEN3 are all 16X6.5. Tire size 225/55-16

Bob
 

·
Premium Member
Joined
·
6,077 Posts
Gracias.
 

·
Premium Supporter
Joined
·
1,162 Posts
Originally posted by jedhead+Jun 17 2004, 07:20 PM--><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (jedhead @ Jun 17 2004, 07:20 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-TrueBlue@Jun 17 2004, 02:15 PM
SHO slicers are 16 x 7, I believe. The bolt pattern is 5 x 108mm.
Slicers on the GEN1 1991 were non directional and are 16X6. Tire size 215/65-16
Slicers on GEN2 from 1993 on are unidirectional and are 16X6. Tire size 215/65-16
GEN3 are all 16X6.5. Tire size 225/55-16

Bob [/b][/quote]
I dont know if you meant ALL gen 3's are 16 or not, but they aren't ALL 16...some are 15...such as the rims on the GL and rims available in 1999 were also 15. 16" are an option in gen 3. 16" became standard in gen 4.

-Kyle
 

·
Registered
Joined
·
533 Posts
Discussion Starter #7
the rim on my 94 GL is 15 (205/65/15)
 
1 - 7 of 7 Posts
Top