Taurus Car Club of America : Ford Taurus Forum banner

1 - 18 of 18 Posts

·
Premium Member
Joined
·
1,407 Posts
These are the only ones i got atm... Ill take a better one tomorrow when i get my car back.



 

·
Premium Member
Joined
·
2,158 Posts
Discussion Starter #3
QUOTE (sojiaraggs9000 @ Mar 12 2009, 05:47 PM) index.php?act=findpost&pid=707986
These are the only ones i got atm... Ill take a better one tomorrow when i get my car back.



[/b]
I really like it where did you buy yours..i talked to a few people on here about two years ago
about them but i figured with new members and people buying these i would get a better idea

Thanks for posting and if you would send me a link or name where you bought yours :banana:
 

·
Premium Member
Joined
·
1,407 Posts
QUOTE (GODFATHER @ Mar 12 2009, 06:26 PM) index.php?act=findpost&pid=708036
QUOTE (sojiaraggs9000 @ Mar 12 2009, 05:47 PM) index.php?act=findpost&pid=707986
These are the only ones i got atm... Ill take a better one tomorrow when i get my car back.



[/b]
I really like it where did you buy yours..i talked to a few people on here about two years ago
about them but i figured with new members and people buying these i would get a better idea

Thanks for posting and if you would send me a link or name where you bought yours :banana:
[/b][/quote]


eBay just search for "49" m3 lip" prices range from $7 to $40 depending on the finish you want and or if you want leds in it... IMHO the leds cheapen it.
 

·
Premium Member
Joined
·
2,158 Posts
Discussion Starter #5
QUOTE (sojiaraggs9000 @ Mar 12 2009, 10:19 PM) index.php?act=findpost&pid=708065
QUOTE (GODFATHER @ Mar 12 2009, 06:26 PM) index.php?act=findpost&pid=708036
QUOTE (sojiaraggs9000 @ Mar 12 2009, 05:47 PM) index.php?act=findpost&pid=707986
These are the only ones i got atm... Ill take a better one tomorrow when i get my car back.



[/b]
I really like it where did you buy yours..i talked to a few people on here about two years ago
about them but i figured with new members and people buying these i would get a better idea

Thanks for posting and if you would send me a link or name where you bought yours :banana:
[/b][/quote]


eBay just search for "49" m3 lip" prices range from $7 to $40 depending on the finish you want and or if you want leds in it... IMHO the leds cheapen it.
[/b][/quote]


nice ...i don't want to sound like a tight ass but that's a lot of money for a piece of
plastic stock cut off a roll ...that looks like something you can buy from home depot
im going to look for it local...thanks :thumb:
 

·
Premium Member
Joined
·
1,407 Posts
QUOTE (GODFATHER @ Mar 12 2009, 09:40 PM) index.php?act=findpost&pid=708078
nice ...i don't want to sound like a tight ass but that's a lot of money for a piece of
plastic stock cut off a roll ...that looks like something you can buy from home depot
im going to look for it local...thanks :thumb:[/b]
Its solid rubber not plastic...... I got mine for $7.99 if thats too much money you might as well sell your car cuz ull spend more than that in gas just letting it warm up before u hop it. :p The carbon fiber ones are like $24.99 and the ones with the l.e.d.s are like $39.99.
 

·
Premium Member
Joined
·
2,158 Posts
Discussion Starter #7
QUOTE (sojiaraggs9000 @ Mar 13 2009, 10:22 AM) index.php?act=findpost&pid=708199
QUOTE (GODFATHER @ Mar 12 2009, 09:40 PM) index.php?act=findpost&pid=708078
nice ...i don't want to sound like a tight ass but that's a lot of money for a piece of
plastic stock cut off a roll ...that looks like something you can buy from home depot
im going to look for it local...thanks :thumb:[/b]
Its solid rubber not plastic...... I got mine for $7.99 if thats too much money you might as well sell your car cuz ull spend more than that in gas just letting it warm up before u hop it. :p The carbon fiber ones are like $24.99 and the ones with the l.e.d.s are like $39.99.
[/b][/quote]

i seen 7.99 but shipping was 25.00 :dunno:
 

·
Premium Member
Joined
·
2,124 Posts
how flexible are these i found some 51 inch ones that would be the right length for my contour but the trunk on the contour has a pretty good curve to it
 

·
Registered
Joined
·
230 Posts
QUOTE (sable23 @ Mar 13 2009, 01:44 PM) index.php?act=findpost&pid=708220
how flexible are these i found some 51 inch ones that would be the right length for my contour but the trunk on the contour has a pretty good curve to it[/b]
They are quite flexible. I have one in my basement that I am going to start working on soon to make it fit my G3. I will post pictures once it's done.
 

·
Premium Member
Joined
·
1,407 Posts
QUOTE (GODFATHER @ Mar 13 2009, 11:18 AM) index.php?act=findpost&pid=708211
QUOTE (sojiaraggs9000 @ Mar 13 2009, 10:22 AM) index.php?act=findpost&pid=708199
QUOTE (GODFATHER @ Mar 12 2009, 09:40 PM) index.php?act=findpost&pid=708078
nice ...i don't want to sound like a tight ass but that's a lot of money for a piece of
plastic stock cut off a roll ...that looks like something you can buy from home depot
im going to look for it local...thanks :thumb:[/b]
Its solid rubber not plastic...... I got mine for $7.99 if thats too much money you might as well sell your car cuz ull spend more than that in gas just letting it warm up before u hop it. :p The carbon fiber ones are like $24.99 and the ones with the l.e.d.s are like $39.99.
[/b][/quote]

i seen 7.99 but shipping was 25.00 :dunno:
[/b][/quote]


Ah yes your right... well there is some listed for 24.99 with free shipping :huh:




QUOTE (sable23 @ Mar 13 2009, 11:44 AM) index.php?act=findpost&pid=708220
how flexible are these i found some 51 inch ones that would be the right length for my contour but the trunk on the contour has a pretty good curve to it[/b]

Pretty flexable.. .what I did was stick it to the trunk little by little while shaping it into place.
 

·
Premium Member
Joined
·
2,124 Posts
ok i may go for it after i get the trunk painted and let it cure and i will let you all know how it goes. sorry for the thread jack
 

·
Registered
Joined
·
20 Posts
Has anyone ever tried this on a gen3 sable? I was just curious as to how it would look on mine since it has the curved trunk lid. Also can these be painted easily?
 

·
Premium Member
Joined
·
2,158 Posts
Discussion Starter #13
QUOTE (gray-b79 @ Mar 14 2009, 01:39 PM) index.php?act=findpost&pid=708562
Has anyone ever tried this on a gen3 sable? I was just curious as to how it would look on mine since it has the curved trunk lid. Also can these be painted easily?[/b]
YES THEY ARE VERY FLEXIBLE AND CAN BE PAINTED

SORRY FOR THE CAPS LOC
 

·
Registered
Joined
·
230 Posts
QUOTE (gray-b79 @ Mar 15 2009, 04:59 AM) index.php?act=findpost&pid=708703
Any pics of these on gen3 sable?[/b]
I'm quite sure it has never been done, as stated already it has only been done on G4's so far. I have one sitting in my basement and I will be working on making it fit this week for my G3 Taurus.

I will post pictures when I have them.
 
1 - 18 of 18 Posts
Top