Taurus Car Club of America : Ford Taurus Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter #1
Ok i finally started this mod. I am going to use blue leds. I have everything ready but i have a problem. I can not remove the mirror from the plastic holder. On the backing of the mirror is a back sticky pad thing. I have tried a hair drier with no luck. The mirrors in the guide in the Modification Aesthetic are not like mine. Has anyone done this mod on a nonheated gen4 and how did they remove the mirror from the plastic holder?
 

·
Premium Member
Joined
·
2,090 Posts
they are identicle, i used a screw driver and pryed!!!! yes i got a lot of guts. If you are very slow and gentle, they will pry off. There is a pad of sticky tape plus hot glue holing them on...HAVE FUN!

Brad
 
1 - 9 of 9 Posts
Top