Taurus Car Club of America : Ford Taurus Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
955 Posts
Have you tried resynching it to the car? I know that when the batteries are swapped out, you must do this.

I believe this procedure will work for our Taurus'

http://www.ehow.com/how_7334843_reprogram-car-key-remote.html

Text in case link ever moves or otherwise breaks:
1) Enter your car with your ignition key, open the driver's door, close all of the other doors and make sure the driver's door is unlocked.
2) Insert and remove your key from the ignition twice, close and open the driver's door twice, insert and remove the key from the ignition once and close and open the driver's door two more times.
3) Insert your key into the ignition again, leave it there, close the driver's door, cycle the key "On" and then back "Off," and remove the key from the ignition.
4) Wait for the door locks to cycle and press and hold the "Lock" and "Unlock" buttons on your remote for two seconds
5) Release the two buttons and press and hold the "Lock" button by itself for two seconds and wait for the locks to cycle. This will complete the programming sequence and you can remove your key from the ignition.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top