Taurus Car Club of America : Ford Taurus Forum banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
8,755 Posts
Those relays are nothing special.... just standard 12 V SPDT relays.

Assuming the circuit board is a single layer board, the bad relay can be unsoldered and a new 12 V SPDT small relay can be soldered in if you can find the correct pin configuration. If you cant find a relay with the correct pin configuration, you can solder wires to the circuit board and bring them out of the GEM/SJB and mount the relay external to the GEM/SJB. Ebay has many many types of relays dirt cheap. Never done a repair like this on a GEM/SJB, but I have done this type of repair on many different electronic devices over the last 50 years.
 
1 - 1 of 1 Posts
Top