[americanmotorsport.com]

I am now a preferred vendor, so I can answer any questions about my products and what not in the forums.

Please check out my site at www.americanmotorsport.com

 

[dant98]

And I personally vouch for Alberto's compitance in EEC programming. He also has experiance with other aspect of performance modification such as forced induction which may help some of you. I think eventually I want to go with a supercharger setup and will rely on Alberto to do my tuning if and when I ever get there.

-Dan

 

[Patrick Norris]

Originally posted by sabledale@Feb 18 2004, 07:44 PM
Thanks for anouncing on our forum that you are in the buisness of screwing people out of money selling bull s*** products that do more harm than good in the long haul.

Guess what I am going to be the first one to tell you that this reply is inappropriate and negative and if you have something to say about a vendor/product take it to the pms. American Motorsports is a prefered accredited TCCA vendor and nothing your simple little mind can come up with is gonna make people not buy his product.

 

[Guest]

Originally posted by sabledale@Feb 18 2004, 07:44 PM
Thanks for anouncing on our forum that you are in the buisness of screwing people out of money selling bull s*** products that do more harm than good in the long haul.

Not sure what this is all about, but to my knowledge, only two of us have had experiences with Alberto. If you haven't had an experience with him, you have no grounds to judge. Even if you had a bad experience, there's better ways than this to handle it.

Further outbursts like this will not be tolerated.

 

[americanmotorsport.com]

Thanks guys. But Patrick, remember it's American MotorSport w/o the "s" at the end. I think there is another company that uses the "s" and I wouldnl't want any confusion.

Yeah I never dealt with this guy before..no idea what his beef is.

 

[Engels]

americanmotorsport.com since you know a lot about ford pcm what's the diference of this PCM's

F1DF-12A650-CD D1T3
F1DF-12A650-CE D1T4

they work on a taurus 3.0L 1991

 

[americanmotorsport.com]

I am a bit busy to track down the part numbers...what are the EEC codes?

What do you need to know about these?

 

[Engels]

clock speed

 

[SHOoff]

americanmotorsport.com,

I have a 95ATX SHO, what kind of deal can I get on--Chip, EGR delete, 80mm MAF?

Also, I might be able to get a free set of 3.0MTX heads. What kind of gains will that combo give me?

 

[americanmotorsport.com]

Engels: if those are both 1991, they are the same clocm speed, 15mhz.

SHOoff: The price is $325 plus $15 s/h for the chip. Did you have the MAF or did you want it from me? What is your EEC code? E-mail me on this...