Taurus Car Club of America : Ford Taurus Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
Before anyone gets to crazy here, I have a gen 4 sel. Meaning I just need assistants on wiring the heated mirror to the connector plug. Basically inserting it in the correct slot in the plug, and also in the mirror. I have gen 3 heated mirrors, the say Heated, I just forgot to look on how it was wired...

Thanks!
 

·
Premium Member
Joined
·
7,307 Posts
Shouldn't they just be plug and play??
You need 5 wires total, 3 for the mirror movement and 2 for the heat.
Since you have an SEL, your main door harness for the mirrors should have at least 5 wires (7 wires if you have the puddle lights).
 

·
Registered
Joined
·
173 Posts
Discussion Starter · #3 ·
Shouldn't they just be plug and play??
You need 5 wires total, 3 for the mirror movement and 2 for the heat.
Since you have an SEL, your main door harness for the mirrors should have at least 5 wires (7 wires if you have the puddle lights).
Yes that is true, but my case is I pulled the wires from the plug itself. Making it so I didn't have to buy the whole housing. I just didn't pay attention which wire goes into the plug, and which order it attaches to the mirror.
 
1 - 3 of 3 Posts
Top