Hid
21 - 24 of 24 Posts
21 - 24 of 24 Posts
Join the discussion
Recommended Reading
-
ABS Brake Module
Maintenance and RepairGood Evening Bull owners, My 2004 SES is displaying ABS warning Code B1342. This is apparently a code indicating the Module side of the ABS is failing. The ABS Module is mounted next to, but is separate from the ABS Hydraulic Pump and FORD P/N for the module is 4F122C219BA. However this...- 5
- 217
-
Windrider883 · updated
-
Interlock on Shifter sometimes won't let me select DRN etc
Maintenance and Repair2004 Vulcan column shifter I changed out the shifter cable, the old one broke. Now I have a problem shifting into any gear. Feels kike it's locked, as if the key is not in ignition or brake not applied. You can try it a few times then it returns to normal and you can select gears and drive...- 0
- 11
-
JayKay · updated
-
Clunking Noise Especially Left Front Wheel While Someone Turns Steering Wheel Back/Forth
Maintenance and RepairHello Guys, Hope all is well. I have a 2013 Ford Taurus Limited 3.5 V6 with 78,000 miles. I hearing a clunking noise, especially at left front wheel while having someone turn the steering wheel back and forth. Parts replaced thus far are sway bar links, front struts, inner and outer tie rods...- 3
- 109
-
Serp Belt length for Gen IV Vulcan.....
Maintenance and RepairDoes anyone know how many inches long serpentine belt [for all accessories] should be on '02 vulcan 6 cyl Uvin? I've found 3 different lengths of 85.4" long (oem: 1F1Z 8626-AB) 83.3" long (oem: 2F1Z 8620-AA); 81.5" long (oem:1F1Z 8620-BB) just with one dealer/manufacturer. Don't want to wait...- 3
- 118
-
Mayadi · updated
-
Whistling noise when accelerating
Maintenance and RepairI have a 2004 Ford Taurus DOHC and it makes a whistling noise when i accelerate and when it hits over ~3000 RPM. it has a loss of power from this. Replaced intake manifold gaskets all 12 of them and airmass sensor and the intake manifold was cleaned and new gaskets. new air intake boot. new egr...- 6
- 206
-
DiegoCole · updated
Join now to ask and comment!