Taurus Car Club of America : Ford Taurus Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
23,851 Posts
Both sides on my 98 & 99 are turned clockwise to compress the piston? I would remove both caliper bolts to inspect, clean and relube slide pins. Since rears arent done as often as fronts, the pins are notorious for seizing up. No torx tool needed to remove rotor. Iirc, caliper bolts require 13mm and mount brk. 15mm.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top