I just took off the silencer and have a K&N Panel Filter. I have the mods on the Left panel nothing else
Gotta Love My Performance
As many would know there isn't much to do to a Taurus vulcan so I decided to take out the huge silencer for my 94 Taurus. I did unleash some extra performance but it hindered my driveability. At idle laugh at this guys, I see a set 1500RPM. After a while it will go back to 1100 but rev it and there you see the 1500 again. I think that this is highly affecting my gas mileage
. I also have tried power braking but see that the torque converter is set at 2000. So if anyone knows where I am getting at. From the start I am basically power braking stoplight to stoplight. Any way to lower the idle? I know that the Idle screw shouldn't be messed with because it is set at the most it can be closed. I also noticed that the revs are much faster.
. I also have tried power braking but see that the torque converter is set at 2000. So if anyone knows where I am getting at. From the start I am basically power braking stoplight to stoplight. Any way to lower the idle? I know that the Idle screw shouldn't be messed with because it is set at the most it can be closed. I also noticed that the revs are much faster.
