Taurus Car Club of America : Ford Taurus Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Has anyone tried using VW/Audi wheels on their Gen4? Passat and A4 are what I was thinking. The offset and lug pattern look like they are spot on. Hub bore might be a little small at 57mm, but if that's too small, that could be fixed with an overbore on a mill in a couple of minutes.

-B
 

·
Registered
Joined
·
11 Posts
Discussion Starter #3
QUOTE (Boomer73 @ Apr 14 2009, 01:40 PM) index.php?act=findpost&pid=717674
Has anyone tried using VW/Audi wheels on their Gen4? Passat and A4 are what I was thinking. The offset and lug pattern look like they are spot on. Hub bore might be a little small at 57mm, but if that's too small, that could be fixed with an overbore on a mill in a couple of minutes.

-B[/b]

Never mind. My info on the lug pattern was wrong. They are all 5x100 or 5x112.
 

·
Premium Member
Joined
·
8,708 Posts
Try volvo or jaguar wheels. Bolt pattern is correct, though most volvo hub bores are about 1.5mm too big (65mm vs 63.3mm).
 
1 - 4 of 4 Posts
Top