[Twilight]

The door panel looks a lot harder to take off than it really is. It's just a few screws...one in the doorhandle, a couple around the outside I believe... then just pry the clips out with a screwdriver. Yes they are 6x8's all around...

I recommend components in the front but do not be swayed by the many "ways" speakers come with. Often they are there to eliminate a noticeable hole in frequency range, more often than not the midrange where you do not normally think to listen. Everyone is struggling to make full range speakers that hit 25 Hz, why?!?!? that is for subwoofers to do, make a speaker with no holes in the range from say 80 Hz up to 20kHz!!!

Let us know what kind of speakers you are thinking of getting and we can help ya out.

 

[Twilight]

My Sony Xplod 6x9's came with a template I traced out onto a sheet of 1/2" MDF and cut out with a jigsaw. I then predrilled and countersunk the holes (so the screws would go all the way in) and screwed these in far enough to go all the way down, then stuck the speakers on top and screwed them into the spacers. Boom, 6x9's in a 6x8 hole. lol

 

[Twilight]

I did the Xplods cause 6x8's were not available from Walmart, and I had store credit.

The bass response on these babies is phenomonal. I have to admit Sony made a good bass speaker. However anything over 500 Hz just plain sucks.