[ict_Lx]

I am in the process (Right now) of taking my gauge cluster out to install my reverse glow gauges. I have the instructions off of v8sho.com...the only problem is that the didn't say anything about the little black cable attached to the bottom of the speedometer with a very small bolt. Does anyone know what size this bolt is or how to get it out. I need this ASAP if possible. Thanks.

 

[ict_Lx]

Nevermind...I'm retarded. I needed to finish taking some of the torx screws out first...

 

[godspunk32]

Let me know where you sent the power wire.

JR

 

[firespirit]

Power wire? I sent mine to the brown wire in the switch, then the ground is under the knee bollister

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

[godspunk32]

So those are the only two wires you need to connect? What disables the bulbs in the cluster?

JR

 

[firespirit]

I didn't disable them. You need those for the turn signals and such. Why disable them?

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

[godspunk32]

I thought that it would illuminate the gauge cluster on top of the reverse lit gauges...like...you would have the backlit guages, and then when you turned the lights on, you'd also have bulbs in the back that would light up the speedo and tach like when the traditional gauge faces were in there.

JR

 

[submariner]

nah, the old ones don't show up underneath... glo gauges have a black layer that eliminates light from underneath