Taurus Car Club of America : Ford Taurus Forum banner

1 - 20 of 38 Posts

·
Registered
Joined
·
799 Posts
Discussion Starter #1
Hey guys, sorry this took so long, needed to dig out my Paypal invoices from storage so I could get the names needed.

The following is a list of people that are still owed parts from the last group buy. Most did not include their forum name on their Paypal invoice, for those people I will include their email address. Is there a way that either of you could use an email address to find a TCCA SN? Hopefully so, this will make things a lot easier.

Da list:

Scott Robinson, forum name Ict_Lx , FSTB and SFC's for a Gen 3.

Chris Sexton, [email protected], Gen 3 FSTB

James Arthur, [email protected], Gen 4 FSTB in Performance White

Derek Sellers, [email protected], Gen 4 FSTB

Pierre Fogal, [email protected], Gen 3 FSTB


There are two other people that I do not have invoices for, but I know they are owed parts and I've spoken to them via PM here.

Ashley (firespirit) had paid for Gen 3 SFC's, but has decided she is not doing any more mods to that car. She had initially requested a refund, which I agreed to, once she purchased her Gen 2 SHO we made another deal for a custom front strut brace. That brace will ship next week and she will be taken care of.

Another member, Nidan, had initially paid for an FSTB and SFC's for a Gen 3. From what I understand he is getting rid of his Gen 3 soon, so we worked out a deal that gets him a refund on the SFC's, and when the FSTB's are done I will ship one to him so that he can sell it.




Now, if there are members that you all have heard from that are not listed here, please let me know. To the best of my knowledge these are the only people that are owed parts, however I can no longer access the Paypal records from the group buy. It is possible that an invoice or two was misplaced in the chaos of the divorce. Highly unlikely because I tried as hard as I could to keep my paper invoices intact and their whereabouts known, but ya never know.

Thanks guys for setting this up, and not giving up on the whole scenario.

-Bob
 

·
TCCA Staff (Retired)
Joined
·
3,816 Posts
Sounds good...I will go ahead and add the members named to this forum for private discussion.

Thanks Bob!

ETA: Ok everybody is added to this forum except...

James Arthur, [email protected], Gen 4 FSTB in Performance White

Pierre Fogal, [email protected], Gen 3 FSTB

There is no record of either email address or name??

Members listed...please check in below. More information will follow.
 

·
Registered
Joined
·
799 Posts
Discussion Starter #4
Sounds good...I will go ahead and add the members named to this forum for private discussion.

Thanks Bob!

ETA: Ok everybody is added to this forum except...

James Arthur, [email protected], Gen 4 FSTB in Performance White

Pierre Fogal, [email protected], Gen 3 FSTB

There is no record of either email address or name??

Members listed...please check in below. More information will follow.

[/b]

Pierre may be a buyer from the V8SHO email list. At this point I won't worry about it.

James Arthur is definitely from here, though. Maybe make a post on the forums that I'm looking to get in touch with him? Advice from staff on this?
 

·
Registered
Joined
·
3,686 Posts
That sounds good to me, Bob. I likely will have to keep driving the bull for a while, as the wife's 95 Escort is falling apart, and i don't feel like fixing it anymore. She doesn't care, cuz it's still gettin her around, but with our baby due in 5 wks, i'm hoping to get her into a newer and more reliable car in the spring. So, i'll probably drive my Taurus a little longer til i can get her a new car, then save up for one for me.
 

·
Registered
Joined
·
799 Posts
Discussion Starter #6
Definitely have to take care of the wifey first! Good luck with the baby, get plenty of sleep now. :lol:
 

·
Registered
Joined
·
920 Posts
Information for me is also correct. I just moved though so pm me for my new address. Thanks Bob!
 

·
Registered
Joined
·
799 Posts
Discussion Starter #8
Information for me is also correct. I just moved though so pm me for my new address. Thanks Bob!
[/b]
OK Scott. When I am ready to ship I will contact you.
 

·
Registered
Joined
·
920 Posts
<div class='quotemain'>
Information for me is also correct. I just moved though so pm me for my new address. Thanks Bob!
[/b]
OK Scott. When I am ready to ship I will contact you.
[/b][/quote]

Sounds like a winner! Thanks again.
 

·
Registered
Joined
·
799 Posts
Discussion Starter #10
Barry/Jason, one more to add: Member name SJP, Scott Parke, who is awaiting two strut braces, one for a Gen 4, and one for a V8 SHO.

Thanks!
 

·
Registered
Joined
·
3,686 Posts
Any news on an expected ship date?
 

·
Premium Member
Joined
·
67 Posts
Bob-

Hi there. Chris Sexton/Sal Gomes/proud papa reporting in.

It's very exciting that the parts are still available and can be shipped.

My order was for a Gen IV bar and the listing at the top recorded a Gen III so I am hoping that is a typo and there is really a Gen IV bar for me.

I appreciate your effort to get the parts out.

Also, wouldn't that be "pissah" under you avatar? I'm a proud midwesterner but I understand that's how you folks talk up there.
 

·
Registered
Joined
·
799 Posts
Discussion Starter #15
Bob-

Hi there. Chris Sexton/Sal Gomes/proud papa reporting in.

It's very exciting that the parts are still available and can be shipped.

My order was for a Gen IV bar and the listing at the top recorded a Gen III so I am hoping that is a typo and there is really a Gen IV bar for me.

I appreciate your effort to get the parts out.

Also, wouldn't that be "pissah" under you avatar? I'm a proud midwesterner but I understand that's how you folks talk up there.
[/b]

Chris, my mistake it is a G4 bar. They are the same as the G3, so it wouldn't have been an issue, but at least we're clear. I'll edit my original post. :)

Regarding pronunciation, I'm tryin to sound like one of them smaht nawtheastuhs. :lol:



<div class='quotemain'>
Any news on an expected ship date?
[/b]
I am wondering this too, :dunno:
[/b][/quote]


Ash, yours is already made and sitting on a shelf (for those not in the know, Ash and I made a deal for a G2 bar that I had custom made for another customer who changed their mind). I just need to find time to get up to the shop and get it to ship. I will not be there this weekend, but will be next weekend. Being an hour and a half away (from work anyway), it's tough to get there during the week.


As for all the other parts, I need to order the materials and remake them. Long story short, everything was made and in a storage unit when Anonda and I split up. Since her name was on the unit, I was denied access to those parts, and my other stuff in there. Subsequently she let the payment fall behind, and the contents were sold. If I had known this was going to happen, I would have gone to the auction and bid on buying back my own stuff, but I was not notified of it.

So somewhere, there's a guy that won an auction with a bunch of bent metal tubes wondering what the hell they are....

I am awaiting pricing from three vendors, because my original vendor of the laser cut mounting plates went way up in price. I realize that steel has gone up, but not by as much as he wanted. I was also not very satisfied with his last run of parts for me either. They worked, but did not look as nice as I would have liked them to.

I'm expecting to have pricing and a plan together for the parts I need to make in the next few weeks, at which point I will make a post here that will outline a time schedule for delivery.

Ash, you'll have yours before everyone else because it's already made.
 

·
Premium Member
Joined
·
2,577 Posts
Hi Bob!

Jenny Erdmann here. I bought a gen 4 FSTB from you in 2005 and have yet to receive it. SO add me to the list. I could send you the paypal info if you would like.

thanks.
 

·
Registered
Joined
·
3,686 Posts
How are things coming with this, Bob? I'm now trying to sell my car, so i'll either need parts or a refund fairly soon. Thanks.
 
1 - 20 of 38 Posts
Top