Taurus Car Club of America : Ford Taurus Forum banner

Front Sway Bar Bushings (Stabilizer Bar)

1K views 2 replies 1 participant last post by  David G in Tennessee 
#1 · (Edited)
Please real my reply post before starting this project.....👀👀👀👀

Not sue why these are so hard to find (part number). ....I basically measured and guessed on the MOOG website.
But here is the part number.... Moog K200165.

Amazon Reference....
Moog K200165 Sway Bar Bushing Kit Amazon.com: Moog K200165 Sway Bar Bushing Kit: Automotive

This should also cover the following cars....

2007-2009 Taurus / Sable / 500 / Montego


Hope this helps.........
 

Attachments

See less See more
3
#3 ·
Not sue why these are so hard to find (part number). ....I basically measured and guessed on the MOOG website.
But here is the part number.... Moog K200165.

Amazon Reference....
Moog K200165 Sway Bar Bushing Kit Amazon.com: Moog K200165 Sway Bar Bushing Kit: Automotive

This should also cover the following cars....

2007-2009 Taurus / Sable / 500 / Montego


Hope this helps.........

UPDATE....READ BEFORE ATTEMPTING THE BUSHING CHANGE... :
They are the correct bushings (P/N) however.....ford made the brackets different than
I have changed in the past. The “U” part of the mount that is bolted with 2 bolts are welded to the base
of the mount assy. So I tried separating the two after dropping the subframe about 3 inches. A large dead blow and chisel.....wouldn’t budge....so no joy.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top