Taurus Car Club of America : Ford Taurus Forum banner

Bullgeek, jeff k, or anyone with answers

1664 Views 12 Replies 6 Participants Last post by  wuchun
What model years used coil-on-plug and was it only on tecs? Also, which tec model year was the pcv moved from down in front of the uim back toward driver strut tower area? And lastly, what year needed CAN capable code reader?
1 - 1 of 13 Posts
Good question on when Ford went to CAN...... at least up to 05, and I think 06/07 on the Taurus, it was a hybird CAN/SCP/PWM system (not including the weird audio system network), with the codes / PIDs, etc coming out in CAN format. I dont think Ford went to a 100% CAN thru the whole in car network until 08 MY. How far back is a CAN compatable scan tool needed? I am thinking 01 or 02? I dont remember for sure if the wifes 01 Vulcan (totaled in 04, but saved her life in the process) was CAN output or not. __________________
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.