Taurus Car Club of America : Ford Taurus Forum banner
1 - 3 of 3 Posts

· Super Moderator
Joined
·
8,907 Posts
PCV on the Tec moved to the "I can actually see it and get to it" position in 04.

Good question on when Ford went to CAN...... at least up to 05, and I think 06/07 on the Taurus, it was a hybird CAN/SCP/PWM system (not including the weird audio system network), with the codes / PIDs, etc coming out in CAN format. I dont think Ford went to a 100% CAN thru the whole in car network until 08 MY. How far back is a CAN compatable scan tool needed? I am thinking 01 or 02? I dont remember for sure if the wifes 01 Vulcan (totaled in 04, but saved her life in the process) was CAN output or not.
 

· Super Moderator
Joined
·
8,907 Posts
Yup, horizontally. Sticking out of the cam cover toward the driver side fender.
 

· Super Moderator
Joined
·
8,907 Posts
See my post above.... 04 was a hybird CAN system. I believe 08 was the first year that CAN protocol was required for the entire system.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top