[Kevin3251]

I have a 93 Sable GS .I have replaced both rear calipers and rotors and the brakeline that comes from the proportioning valve near the driver side rear wheel and goes to the passenger side rear wheel.I got fluid out of the valve but I can't get any out of the caliper bleeder screw. I could bleed the other three calipers.What am I doing wrong?

 

[1fast97]

I don't know if you already knew this or not... you need to jack up the rear suspension to normal height to get any fluid to flow through the proportioning valve. That might be the problem or it could be a clogged line but I doubt it could be that clogged.