Taurus Car Club of America : Ford Taurus Forum banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Hello everyone,
This is my first post on this site. I look forward to receiving answers and also providing help when I can.
2001 Taurus with Auto A/C. Only have hot air blowing from the vents. I replaced the blend door actuator even though I tested the motor with a 9v battery and it turned in both directions. I had a new part so put it in. Blend door will not move when the air temp is changed on the A/C control panel.
I tested the wires to the actuator for voltage and found no voltage on any of them. Attached is a picture of the schematic. What should my meter be reading on these wires? Should these be a voltage?
I'm looking at the wires between the Remote Climate Module and the Blend Door Actuator.
1 - 1 of 1 Posts