[kbcnick]

so im very seriously considering lowering mine. i have eibach lowering springs picked out lowering it 1.5 in the front and back. im mainly just looking for tires now. im wondering if anybody else has done any lowering and some advice maybe?

 

[loudsho92]

Many times over. What year?

Eibach has stopped making them for all years so you will have a hard time finding the springs. We do have the springs for the Gen1/2 and we will be making springs for the Gen3/4.

 

[kbcnick]

its a 99

 

[loudsho92]

Unless you have the springs they will be very hard to find. Eibach stopped making them a while ago.

We are working on a lowering spring though.

You may need to cut the front spot welds to get an alignment.

For the rear you may or may not need Ingalls adjustable control arms: Ingalls Adjustable Rear Control Arms

 

[kbcnick]

Eibach Lowering Springs - PRO-KIT (Lowers Front:1.4 inch/ Rear:1.4 inch ) for 96-99 Ford Taurus at Andy's Auto Sport

...

 

[jedhead]

Those springs are for a wagon.
You will need to remove the spot welds on the front to get the camber back and you can use concentric bushings or adjustable arms in the rear to restore the camber.

Bob

 

[loudsho92]

As stated it is for the wagon.

The thing is lot of places still list them because they do not update their site. So unless they have it physically in hand they do not have it. 90% sure they do not have it.