Taurus Car Club of America : Ford Taurus Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I recently installed leather seats from an '02 Taurus SEL to an '03 Taurus SES Sport. There is a button on the driver's seat for the foot pedal height adjustment.
Does anyone know if it is possible and how dificult it would be to transfer the foot pedal height adjustment mechanism and electronics from the 02 SEL to the 03 SES? Thanks.
 

·
Premium Member
Joined
·
7,307 Posts
Search is your friend.
There was a topic on that not too long ago.:)
 

·
Registered
Joined
·
6 Posts
I just put them in my 03 SES. Not very hard. Wiring harness was in place, it was plug and play. You do want to remove the u-joint from the steering colunm. I did have to modify my brake light switch slightly, cut off two tabs so I could get the pin back through to hold the brake rod to the master cyl. in place. Grab as much of the harness as you can just in case. The blank on my dash where the switch went actually had the wires for the switch plugged into it.
 
1 - 3 of 3 Posts
Top