Taurus Car Club of America : Ford Taurus Forum banner
1 - 3 of 35 Posts

· Premium Member
Joined
·
1,168 Posts
Originally posted by FatTortoise@Feb 8 2004, 01:38 PM
My Gen4 Vulcan FF ran a 8
0-60 mph in 8 sec would put you low 16's/high 15's in the 1/4, which isnt right for your mods. Counting or even a stopwatch is not even close to being accurate. The human reaction time varies too wildly to get an accurate measurement. If you have 1/8 mile times there are sites that can calculate your 0-60 based on your mph.
 

· Premium Member
Joined
·
1,168 Posts

· Premium Member
Joined
·
1,168 Posts
Ok, everyone from here on out has to AT LEAST have a GTECH time. Timing it by counting or stopwatch is very inaccurate, to say the least. And for anyone claiming anything lower than 8.5 sec's, you really should have some power mods (not just a cai) and some actual proof.

 
1 - 3 of 35 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top