Taurus Car Club of America : Ford Taurus Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 5th and 6th Gen Maintenance and Repair
    Just bought myself a 2013 Police Interceptor EcoBoost a couple weeks ago. 140k miles and had it inspected by a third party mechanic before buying. The idle hours on the engine are almost matching the engine hours. Nothing major beyond in a past error in memory for the oxygen sensors. The engine...
  2. 5th and 6th Gen Maintenance and Repair
    I have a 2014 Ford Taurus SEL & just found out my AGS (Active Grille Shutter) is cracked, and was hanging down under the car. However, I managed to push it back up in where it won't drag until I am able to either remove it or have it replaced. So my questions are.. 1. Can I remove my AGS...
  3. Introduction Forum
    I just got a 2014 interceptor off of a cop auction site, it has 168k Miles already and I want to know if I should be checking in on certain things more than others. This is my first Taurus and I’m just trying to keep the car healthy ya know. Thank you (Just learned this sit existed and I’m...
  4. 5th and 6th Gen Engine and Drivetrain
    The transmission fluid in my 08 Taurus is getting on about 158k miles old. The fluid is more of a orange/light brown, similar to the color of engine oil. The car tends to lunge/stutter when the engine is warm, but it doesn't always seem like it's synced up with when the transmission changes...
  5. Maintenance and Repair
    Hello again bull owners, A few months ago we swapped out my rear quick struts in my Taurus. We installed KYBs from Rock Auto. I would use this same brand up front, however I am concerned over the exaggerated heightened ride height. My rear after the changing of the struts is way up in the air...
  6. Maintenance and Repair
    I'm sorry to start ANOTHER thread about headlights, but I went through about 9 pages of the search and didn't see what I am looking for. I haven't replaced a headlight bulb on a Gen 3 since 2008 or 2009. Gen 3 (1999). Chilton's notes to remove the 3 x 10mm bolts that hold the housing in place...
1-6 of 6 Results
Top