Taurus Car Club of America : Ford Taurus Forum banner
Showcase cover image for Y’all ever seen this

Comments

·
Registered
Joined
·
4 Posts
Ok guys this push bar is from a 03-11 crown Vic go rhino edition. I got the brackets and push bar for very cheap ($150) from Craig’s list. Usually they go for a lot more but I was lucky. To mount it you have to remove the bumper and make 2 very accurate holes. The brackets go on the crash bar upfront when you take off the bumper. To get the brackets to align with the crash bar you want to have measure everything. The only problem I came across was the bracket was at least 2 to 3 inches bigger than the crash bar so I developed a wood block so this way there would be no play between the brackets and crash bar upon impact. Very cheap very fun and very reliable did not ruin traction in the front wheel drive design. I would recommend this to anyone that has a need for a push bar and obviously design something better than a wood block because wood rots. I hope this helps any questions please let me know and I will get back to you ASAP 👍👌
 
Top