Talk:Generation 3 and 4 Front Endlink Replacement

From Taurus Car Club Maintenance and Modification Wiki

Jump to: navigation, search

The images and text show use of ratchet to tighten endlink nuts. However - the bolt floats, so that turning the nut with a ratchet will just turn the entire bolt. I've seen other descriptions that show use of 2 box end wrenches, one to hold the bolt in place (8mm) and 1 to tighten the nut (18mm on OEM, 19mm for SL302). I'd like to be able to use just the ratchet, if there is a way for this to work. What am I missing?

thanks...PaulR

Retrieved from "http://www.taurusclub.com/wiki/index.php/Talk:Generation_3_and_4_Front_Endlink_Replacement"
Personal tools