I hope you don't mind this pm about my starter. I did post another response about removing the difficult TOP BOLT on my starter.
I have a 1/4 inch rachet and the 13 MM socket but have one question. The 1/4 inch ratchet is about 10 inches long, so will it fit straight enough to line up with the TOP BOLT or will I need a swivel on the end of it for removal.
Thank you very much.
I have a 1/4 inch rachet and the 13 MM socket but have one question. The 1/4 inch ratchet is about 10 inches long, so will it fit straight enough to line up with the TOP BOLT or will I need a swivel on the end of it for removal.
Thank you very much.