A few issues. Need help

[q0987]

Originally Posted by Jmxtwiztid

Correct.

1. Get in the driver seat and make sure all doors are shut

2. Cycle the key off and on without starting the car 8 times, leave the key in the on posistion at the end of the 8th turn.

3. The lights will flash and the doors will lock and unlock to signal that the GEM is in program mode.

4. Press any button on the remote the lights will flash and the doors will lock and unlock to signal that the GEM has received a signal from the remote.

5. Turn the ignition to off and remove the key, The lights will flash and the doors will lock and unlock to signal that the GEM has exited program mode.

6. Get out of the car and try your remote!

Good to know

[sheila]

Iirc, number of key cycles varies from 5-8 depending upon generation. If it doesn't program, usually indicates car is not equipped with keyless entry option.