QUOTE (thesavo @ Apr 24 2009, 07:37 AM)
Quote:
This is a Pin-out Diagram of the GEM.
I have highlighted where I will need to add the 4 pins for the key pad
[attachment=29274:GEM_C201c.PNG]
Also I got the Reverse stereo harness for a '98 explore and up. And the pins from it don't fit in the GEM connector 
2 possible reasons. The spec for that connector does use different pins. Or the 3rd party that made the connector had to make changes so as not to step on any of fords patents if they have any.
Not sure yet. Connector purchased was American International FWH-597
Additional, I contacted a Ford dealer Parts/Service about obtaining Pins for my GEM and Door Connector. They have no listing of repair connectors pins for these harnii.  . They did how however suggest that they can be obtained from a Junk Yard. Again no U-pick-types around here. Also, NAPA auto may have them. So I will try that route. Seeing if Napa Auto will have the Pins to my GEM connector.[/b]
|
I may be able to help. You need door and GEM?