View Single Post
Old 11-13-2008, 03:18 AM   #4 (permalink)
Steve J.
Junior Member
 
Member Number: 17078
Join Date: Oct 2008
Visit: My Garage
Posts: 2
Rep Power: 0
Steve J. is an unknown quantity at this point
Default

Quote:
Not the best quality video, but it may still be helpful for those who are a bit intimidated by having to pull the door panels off.

http://revver.com/watch/898788

This job is fairly easy and can be done by almost anyone who knows how to use a screwdriver and a ratchet.

Only thing that was a pain was the little clips that hold the door panel on. Some of them get stuck in the door and don't come off with the trim panel, so you gotta pry them out. After trying a few different things I found that the best way to get them out without destroying them was to take 2 flathead screwdrivers. Slide each screwdriver in between the clip and the door on opposite sides of the clip. Slide the screwdrivers downward so that the center of the shafts are in between the clip and the door. Then, pull back on both screwdrivers and it will pop right out. This is best done with long screwdrivers.
[/b]
Link is down. Anyone know where I can see this video?
Steve J. is offline   Reply With Quote