Taurus Car Club of America : Ford Taurus Forum banner

Need strut hardware ASAP

983 views 3 replies 3 participants last post by  Automender12345 
#1 ·
Vehicle: 2002 Ford Taurus LX
Engine: 3.0L SFI Vulcan V6 OHV
Transmission: AX4N 4-speed automatic

Long story short: while working on the car’s suspension in the yard, I (very stupidly) removed the top nut and washer on the front driver’s-side strut. Because the strut was under compression, the nut and washer went flying into the air after I loosened them. I spent two hours looking for them. They just disappeared. :(

Here is a pic of the nut and washer on the passenger-side strut:

https://www.dropbox.com/s/ky9ulbmq5a84nta/Nut and washer.jpg?dl=0

I now need a new nut and washer. Where do I go to get them? I did a bunch of google searching and I can’t even find the part numbers for them. I believe the nut is an M14x2.0.


Thanks,

Ohioan
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top